Serving the Winston-Salem area  ·  (336) 777-7251  ·  Open Mon-Sun 7am-7pm
📞 (336) 777-7251 Free Quote

Metal Roofing in Lewisville, NC (27023) · Local Professionals

Winston-Salem Metal Roofing · Fast response in Lewisville and the Winston-Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+220Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lewisville's larger lots and horse properties out toward the Yadkin River take summer storms across open ground with nothing to break the wind, and the older homes closer to town still wear the original asphalt or wood roofs from decades ago. Whether you're on a brick ranch off Shallowford Road or a newer build near Lewisville-Vienna Road, the roof over your head is the first thing the weather hits.

Homeowners in 27023 call Winston-Salem Metal Roofing because we know how hail, straight-line wind, and winter ice actually behave on Lewisville roofs. Call (336) 777-7251 for a free inspection and a straight answer.

Metal Roofing in Lewisville (27023)

Lewisville is not one kind of neighborhood. You've got large-lot homes and horse properties on the west side toward the Yadkin River, where roofs sit exposed to wind coming across open pasture and storms roll in with hail and straight-line gusts. Closer in, you've got established subdivisions with brick ranches and two-story colonials, many still on asphalt shingles that are 20 to 30 years old and starting to fail at the fasteners and flashing. The red clay ground holds water after heavy rain, and on sloped lots drainage around the foundation matters as much as the roof itself. We also see a fair number of corrugated-metal barns and farm sheds on the rural edges, which need different fasteners and panel profiles than a residential standing seam job.

Our team has worked across Forsyth County and the Winston-Salem area long enough to know that Lewisville roofs take a specific beating: summer thunderstorms with hail, winter ice that dams at the eaves, and humid air that grows moss on shaded shingles. We bring insured crews, the right panel profiles, and a plan for your specific lot, whether it's tight subdivision access or a long gravel drive.

Our services in Lewisville

How a Job Works in Lewisville

Step 1: You call (336) 777-7251 or request a free estimate. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and decking, and give you a written scope with pricing. No pressure, no vague numbers.

Step 2: Once you approve, we pull the required roofing permit through the local building department (rules vary by jurisdiction, so we verify before we start) and coordinate any HOA design review if your subdivision requires it. Our crews handle the tear-off or retrofit, install the new metal roof, and keep the site secure each day. On larger lots or horse properties, we plan access around gates, fences, and animals so nothing gets torn up.

Step 3: We clean up thoroughly, haul away old materials, and do a final walkthrough with you. We don't leave until you've seen the finished roof and know exactly what was done.

Pricing in Lewisville depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Coating and painting starts at $2.50 per square foot, gutters at $9 per linear foot, and snow guards at $1,200. Storm and wind damage inspections are free. Call (336) 777-7251 for a free estimate on your specific roof.

My horse property off Williams Road has a long gravel drive and several outbuildings. Can you handle metal roofing on barns and sheds as well as the house?
Yes. We work on corrugated and ribbed panel roofing for barns, sheds, and agricultural buildings, and we plan access around gates, fences, and livestock so we don't tear up your drive or stress the animals. We'll scope the house and outbuildings together and give you one clear estimate.
A storm just took limbs down on my roof near Lewisville-Vienna Road. How fast can you get out for an inspection?
We offer free storm and wind damage inspections and prioritize active leaks and storm damage. Call (336) 777-7251 and we'll schedule the soonest available slot, usually within a day or two depending on storm volume. We'll document the damage for your insurance claim, though coverage decisions are up to your insurer.
What does a typical metal roof replacement cost for a brick ranch in a Lewisville subdivision?
For a standard ranch, most replacements fall in the range of $9 to $14 per square foot depending on panel type, pitch, and whether we tear off existing shingles or retrofit. A 2,000 square foot roof often lands between $18,000 and $28,000. We give you a written, itemized estimate after a free on-site assessment.
Do I need a permit to replace my roof in Lewisville, and does the historic district or HOA affect what I can install?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary by jurisdiction, so we verify with the local building department before starting. If your neighborhood has an HOA, design review may restrict panel profile and color, and we can coordinate that approval as part of the job.
My neighbor's tree limbs hang over my roof line. What are the rules about trimming and property lines in Lewisville?
In North Carolina, you generally have the right to trim limbs that cross onto your property, but you can't damage the neighbor's tree, and local rules can vary. We handle the roofing side, including repairing punctures and replacing damaged panels, and we'll document the damage. For a boundary dispute, it's best to sort it out with your neighbor or the city before work begins.
Are you fully insured for roofing work at my Lewisville home?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Lewisville's climate, especially with summer storms and winter ice?
Check fasteners and flashing annually, clear gutters and downspouts before fall rains, and watch for ice damming at the eaves in winter. Humid air can grow moss on shaded panels, so a periodic wash and a coating refresh every several years helps. We offer inspections and coating services to keep the roof performing.
Why choose us?

Trusted professionals in Winston-Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Winston-Salem

All your work handled by qualified professionals in Winston-Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

220+ Verified Client Reviews in Winston-Salem

⭐⭐⭐⭐⭐ 4.9/5 · 220 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Winston-Salem · Response within 24h · No commitment · ☎ (336) 777-7251

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Winston-Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm