Licensed & Insured, in Winston-Salem and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Winston-Salem
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (336) 777-7251 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Winston-Salem and surrounding areas · On-site visits included · Free estimate within 24h
Winston-Salem Metal Roofing is a team of local certified professionals based in Winston-Salem. We respond quickly in Winston-Salem and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (336) 777-7251⭐⭐⭐⭐⭐ 4.9/5 · 220 verified Google reviews
“Had them do a metal roof over our old shingles on a 1,800 sq ft ranch, and the crew knocked it out in two days flat. They tarped everything and you couldn't tell they'd been here except for the new roof. Went from dreading the cost to actually liking how the house looks now.”
Metal Roof Over Shingles (Retrofit)
“We wanted a standing seam roof on our Victorian place but were nervous about how it would look with all the gables and porch lines. The estimator actually walked the whole roof with me and showed me exactly how they'd handle the transitions. It came out sharp, the dark bronze panels look like they belong on a house this age.”
Standing Seam Metal Roofing
“Our old red barn out in the county had rusted-through panels and we figured it was a goner. They replaced the corrugated panels and re-fastened everything, and honestly the barn looks better than it has in thirty years. Fair price for a rural job, too.”
Commercial & Agricultural Metal Roofing
“New construction and we went with a metal roof from the start, Winston-Salem Metal Roofing installed the whole thing on our new build, roughly 2,400 square feet, and coordinated fine with our builder. Straightforward, no surprises, done when they said it would be.”
Metal Roof Installation
“We had a leak that only showed up during heavy rain, right where the metal roof meets our brick chimney. They found the failed flashing, replaced it, and sealed it up properly. Two storms since and not a drop inside. Only reason it's four stars is scheduling took a little longer than I'd hoped.”
Flashing, Chimney & Skylight Repair
“Replaced the worn-out metal roof on our house and the difference is night and day. Crew of four, done in about three days, and they swept the yard for screws with a magnet before they left. No more worrying every time the wind picks up.”
Metal Roof Replacement
“We went with stone-coated steel for our brick and stone home because we wanted the metal durability without the shiny look. The crew was careful around the landscaping and the finished roof has this great textured appearance that fits the house perfectly. Genuinely impressed with the attention to detail.”
Stone-Coated Steel Roofing
“Got an inspection on our metal roof before selling the house, half expecting a sales pitch for a full replacement. Instead they gave me an honest report, tightened a few loose fasteners, and told me the roof had plenty of life left. Refreshing to deal with people who don't upsell you.”
Metal Roof InspectionReal photos of our work in Winston-Salem · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, panels and basic trim; price rises with pitch and deck repairs |
| Standing seam metal roof installation | Starting at $12/sq ft | Concealed fasteners, formed trim and full flashing detail; steeper roofs and complex hips move the number up |
| Metal shingle or stone-coated steel installation | Starting at $14/sq ft | Textured profiles for historic and HOA homes; dormers, valleys and chimneys add labor and material |
| Complex or large-scale job | On estimate | Turrets, multiple roof levels and limited access need an on-site walk before we quote a firm number |
| Travel | Included | In Winston-Salem and surrounding Forsyth County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (336) 777-7251, written scope, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment, panels and standard trim on a straightforward roof. |
| Standing seam, complex or steep roof | Starting at $13/sq ft | Covers cut-up hips, valleys and steep pitch common on West End and Buena Vista homes. |
| Premium finish or heavier gauge | Adds $2 to $4/sq ft | Upgraded paint finish or thicker steel panel that extends service life. |
| Sheathing repair or replacement | On estimate | Soft decking found during tear-off is priced after an on-site inspection. |
| Travel | Included | In Winston-Salem and surrounding Forsyth County areas, no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam replacement | Starting at $9/sq ft | Includes tear-off, decking repair allowance, underlayment and concealed-fastener panels; pitch and dormers raise it. |
| Exposed-fastener panel replacement | Starting at $7/sq ft | Corrugated or ribbed panels with new screws and closures; roof size and tear-off layers move the price. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Stamped or granule-coated panels with new flashing; complex hips and valleys increase labor. |
| Copper and specialty metal | On estimate | Soldered seams and patina finishes need an on-site look for scope and material cost. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic exposed-fastener retrofit | Starting at $7/sq ft | Corrugated or ribbed panels over sound single-layer shingles, includes underlayment and standard trim. |
| Standing seam retrofit | From $11/sq ft | Concealed-fastener panels on sub-framing, includes new underlayment and re-flashing at penetrations. |
| Metal shingle or stone-coated recover | From $10/sq ft | Profile-matched panels for HOA or historic review, includes trim and ridge caps. |
| Deck repair and flashing rebuild | On estimate | Soft sheathing, rotted fascia or chimney flashing needs an on-site look before pricing. |
| Travel | Included | In Winston-Salem and surrounding Forsyth County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (sealant, screws, small flashing) | Starting at $450 | Covers resealing a few penetrations or replacing a handful of screws, with price rising by roof height and access. |
| Panel replacement (1 to 3 panels) | Starting at $850 | Includes removing and replacing damaged panels with matching material, with cost driven by panel profile and roof pitch. |
| Full screw replacement and re-fastening | Starting at $1,200 | Covers replacing backed-out or rusted screws across the roof, with price based on roof size and fastener count. |
| Storm damage repair with limb removal | On estimate | Needs an on-site look because limb damage, cracked panels, and flashing tears vary widely by tree size and proximity to the house. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single traced leak repair | Starting at $450 | Includes leak trace, fastener or sealant repair, and water test on one leak point |
| Fastener run replacement | Starting at $650 | Replaces a run of failed gasketed screws with butyl sealant, priced by linear feet |
| Flashing rebuild (chimney or skylight) | Starting at $750 | Rebuilds step and counter-flashing, with price driven by height and access |
| Panel replacement after limb strike | On estimate | Needs an on-site look to match panel profile, color, and trim before quoting |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Like-for-like screw replacement | Starting at $750 | Covers a modest single-slope panel roof with a straightforward screw count and standard access. |
| Oversized screw upgrade | Starting at $1,100 | Includes larger-diameter screws and UV-rated washers for wallowed and stripped holes on older panels. |
| Ridge and edge re-fasten | Starting at $950 | Re-secures ridge caps, rake trim and edge metal that has lifted in foothill wind. |
| Full roof re-fastening | On estimate | Needs an on-site count of fasteners, pitch, height and panel condition before we quote. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard pitch | Starting at $5.50/sq ft | Includes tear-off, underlayment, panels and basic trim; steep slopes and rotten decking move the price up |
| Ribbed R-panel on carport or workshop | Starting at $6.25/sq ft | Includes closures at eaves and ridges; low-slope transitions and added purlins raise the figure |
| 5V crimp on porch or addition | Starting at $6.75/sq ft | Includes period-appropriate trim; tight access in older neighborhoods adds labor |
| Complex or large-scale job | On estimate | Multiple roof planes, chimneys and wall tie-ins need an on-site look before we quote |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle-look metal roof | Starting at $9/sq ft | Includes tear-off, underlayment, flashing, and trim on a standard-pitch home. |
| Slate-look or cedar shake profile | Starting at $11/sq ft | Premium stamped profile; steeper pitches and cut-up hips raise the rate. |
| Stone-coated steel shingle | Starting at $12/sq ft | Granule-coated steel; heavier material and added texture labor move the price. |
| Heavy-gauge premium shingle | On estimate | Thicker steel core and longer warranty; needs an on-site look before quoting. |
| Travel | Included | In Winston-Salem and surrounding Forsyth County areas, no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel shake profile | Starting at $9/sq ft | Includes underlayment, trim, and standard flashing; steeper pitch and dormers move the price up |
| Stone-coated steel slate profile | Starting at $10/sq ft | Includes slate-look panels and standard flashing; complex valleys and chimneys add labor |
| Stone-coated steel tile profile | Starting at $11/sq ft | Includes tile-look panels and trim; curved profiles and tight access raise the rate |
| Retrofit over existing shingles | On estimate | Requires deck inspection and code check on existing layers before a number is given |
| Travel | Included | in Winston-Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay, dormer) | Starting at $20/sq ft | Includes custom-fabricated copper pans and flashing; complexity and access move the price. |
| Full copper architectural roof | Starting at $28/sq ft | Includes soldered seams and trim; roof shape and deck condition drive the final number. |
| Zinc or aluminum specialty roof | Starting at $22/sq ft | Includes panels and standard flashing; custom details and matte finishes add cost. |
| Barn and outbuilding specialty metal | On estimate | Needs an on-site look for size, access and existing structure before a number is given. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, light chalking | Starting at $2.50/sq ft | Includes soft wash, spot prime, and one reflective topcoat on sound panels with normal access. |
| Rust treatment plus coating | Starting at $3.25/sq ft | Adds rust converter and bonding primer on corroded areas, priced by the square footage treated. |
| Full multi-coat restoration | Starting at $4.00/sq ft | Full prep, primer, base coat, and finish coat for older roofs with mixed rust and chalking. |
| Steep or high-access roof | On estimate | Steep pitch, two-story setbacks, or tight tree cover near the roof raises setup and labor time. |
| Travel | Included | in Winston-Salem and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point flashing repair | Starting at $600 | Covers water test, removal of failed flashing and new bent metal at one penetration. |
| Chimney flashing rebuild | Starting at $950 | Step and counterflashing plus cricket where needed; masonry condition and chimney width move the price. |
| Skylight curb and back pan | Starting at $850 | Includes new curb flashing, back pan and underlayment; roof pitch and access affect the final figure. |
| Valley or dormer metal replacement | Starting at $800 | Bent valley or sidewall metal matched to the roof; complexity of the roof line drives cost. |
| Complex or large-scale job | On estimate | Rotten decking, multiple penetrations or steep access need an on-site look before we quote. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style guards over one entry | Starting at $1,200 | Covers a typical single-door zone with pad guards, sealed fasteners, and a drainage check included. |
| Bar or rail system over a walkway | Starting at $1,850 | Bar or rail guards across a longer eave run, priced by linear feet and roof pitch. |
| Steep or two-story roof layout | Starting at $2,400 | Higher pitch and height add setup time; includes fall protection planning and full slide-zone coverage. |
| Complex or large-scale job | On estimate | Multiple roof sections, historic district review, or prep repairs need an on-site look before pricing. |
| Travel | Included | in Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, photos of every failure point, and a written repair versus replacement call. |
| Minor repair (fasteners, gaskets, small panel) | Starting at $350 | Covers screw and gasket replacement or one panel; steep pitch and height push it up. |
| Limb damage and flashing repair | Starting at $850 | Limb removal, panel replacement and flashing rebuild; deck condition and chimney proximity move the price. |
| Large or multi-slope storm damage | On estimate | Needs an on-site look because hail, ridge and flashing damage often run wider than they appear. |
| Travel | Included | In Winston-Salem and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Walk-over inspection with photo report, included when you proceed with repair work. |
| Standalone written inspection report | Starting at $250 | Photo-documented condition report with remaining service life, priced by roof size and pitch. |
| Leak diagnostic inspection | Starting at $350 | Targeted flashing and penetration inspection plus attic-side tracing, priced by access difficulty. |
| Pre-sale or insurance inspection | On estimate | Documented condition report for buyers or claims, scoped after an on-site look at roof complexity. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (336) 777-7251, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 6-inch | Starting at $9/linear ft | Includes site-forming, standard hangers, and one downspout per 30 to 35 feet of run. |
| Half-round or copper gutter | Starting at $18/linear ft | Includes curved profile, hidden hangers, and material upgrade for historic or copper roofs. |
| Leaf protection system | Starting at $4/linear ft | Micro-mesh or screen matched to poplar, oak, and pine debris loads on shaded lots. |
| Downspout and drainage | Starting at $12/linear ft | Includes 3x4 or round downspout, elbows, and discharge routing away from the foundation. |
| Complex or large-scale job | On estimate | Two-story access, steep pitches, historic districts, and long commercial runs need an on-site look. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn, shed or carport re-roof | Free estimate | Includes panel removal, deck check and new exposed-fastener panels; square footage and deck condition move the price. |
| Screw replacement and re-fastening | Starting at $450 | Covers new screws and washers on a typical barn roof; roof height and number of fasteners move the price. |
| Standing seam commercial roof | Starting at $9.50 per sq ft | Includes concealed-fastener panels, flashing and trim; insulation and roof complexity move the price. |
| Insulated agricultural panel system | On estimate | Insulation type, building use and purlin layout need an on-site look before pricing. |
| Travel | Included | In Winston-Salem and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (336) 777-7251, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Winston-Salem need a crew that understands steep mountain pitches, heavy tree cover, and the particular demands of high-elevation exposure. Winston-Salem Metal Roofing is that local resource, built on straight guidance and durable workmanship. We handle metal roof installation, replacement, re-roofs, and repairs on homes throughout Winston-Salem, Kernersville, Clemmons, Lewisville, and Rural Hall. Our network of licensed, insured local contractors knows the aging screw-down roof stock common across the region and the specific ways Piedmont weather tests a roof.
From the historic districts to the newer subdivisions, we match the right metal system to your home and your budget, and we tell you plainly when a repair is the smarter call. If you are ready for an honest assessment, request a free estimate and let us walk your roof with you.
Metal roofs are durable, but they are not maintenance-free. The most common reason a metal roof leaks in Winston-Salem is fastener back-out on 15 to 30 year old exposed-fastener roofs. The EPDM sealing washers under each screw dry out, shrink, and crack, leaving a gap where water enters. Thermal movement causes panels to expand and contract, which can separate seams over time. Failed pipe boots and flashing at chimneys, skylights, and valleys are other frequent culprits, and gusty foothill winds can lift or peel panels. Fallen limbs from winter ice or summer storms may puncture the metal outright.
Ignoring these issues is costly. Water can track along purlins and decking far from the original entry point, leading to rotted sheathing and saturated insulation. What looks like a small stain on the ceiling may be a much larger problem above. Our metal roof repair team diagnoses the source, not just the symptom, and we explain your options in plain terms.
Often, a full screw replacement and re-fastening restores a watertight roof for a fraction of the cost of replacement. We will tell you honestly when that is the right call and when it is time to replace. For active leaks, call (336) 777-7251 to schedule a prompt inspection. You can also contact us online for a free estimate.
We install and service a full range of metal roofing systems. For a premium, long-term solution, standing seam metal roofing uses concealed clips and no exposed fasteners, so there are no screws to maintain. For cabins, barns, and workshops, corrugated and ribbed panel roofing offers an economical, reliable workhorse, though the fasteners will need periodic servicing. We also install metal shingles, stone-coated steel roofing, and copper and specialty metal roofing for accents and historic homes.
Standing seam costs more up front but has no exposed screws to maintain. Screw-down costs less and requires fastener service over its life. We also offer metal roof over shingles (retrofit) when the deck is sound, and tear-off when it is not. Every recommendation is based on your home's condition and your long-term plans.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. You will see typical ranges, but final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, though this is never a guarantee. For a closer look at what drives cost, visit our pricing page.
We encourage you to request a free estimate or free roof inspection so we can give you an accurate, no-pressure assessment. Our goal is to help you understand the real numbers before you commit.
If you have storm damage, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, and coverage decisions rest with your carrier. We make no promise that a claim will be approved. We also never suggest that a deductible could be waived or covered by us. Our role is to give you clear, factual information to support your own claim process.
On permits: in most jurisdictions, a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Winston-Salem building or planning department before starting your project. For help understanding the process, contact us.
Ready to get started? Winston-Salem Metal Roofing serves in Winston-Salem and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Winston-Salem · Response within 24h · No commitment · ☎ (336) 777-7251
Your Free Quote Request