Serving the Winston-Salem area  ·  (336) 777-7251  ·  Open Mon-Sun 7am-7pm
📞 (336) 777-7251 Free Quote

Metal Roofing in King, NC (27021) · Local Professionals

Winston-Salem Metal Roofing · Fast response in King and the Winston-Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+220Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

King, North Carolina sits right where the Piedmont starts to roll toward the Sauratown Mountains, and the housing stock shows it: brick ranches off Main Street, older farmhouses on larger lots out toward Stokes County, and newer subdivisions tucked between Pilot Mountain and Winston-Salem. The wind coming off those foothills is no joke, and it finds every loose fastener and lifted panel on a metal roof.

Homeowners in King (27021) call Winston-Salem Metal Roofing because we know what that wind does to a retrofit over shingles and why screw replacement matters more here than in flatter parts of the county. We are based in Winston-Salem, fully insured, and we handle everything from a single leak repair near King Elementary to a full standing seam installation on a farm building off Highway 52.

Metal Roofing in King (27021)

King is a small town with a mix of property types that each bring their own roofing challenges. In the older neighborhoods near downtown King, you will find brick ranches and modest homes from the 1950s through the 1980s, many with low-slope sections and original flashing that has seen better days. Out toward the Stokes County line, farm buildings and barns with corrugated metal roofs take a beating from foothill wind and need regular re-fastening. Newer subdivisions off Newsome Road and near the King Recreation Center have steeper pitches and HOA guidelines that can dictate panel profiles and colors. The red clay soil holds water after storms, so we pay close attention to gutter sizing and downspout placement to keep runoff away from foundations. And with tall hardwoods and pines throughout town, falling limbs and debris are a constant threat to any roof.

Our team has worked on metal roofs across Winston-Salem and the surrounding areas for years, including plenty of jobs in King. We understand the local building department requirements for permits and inspections, and we know how to document storm damage for insurance claims without making promises about coverage.

Our services in King

How a Job Works in King

Step 1: You call us at (336) 777-7251 or request a free estimate online. We schedule an on-site assessment at your King property, usually within a few days for non-emergencies. We inspect the roof, check for leaks, loose fasteners, and flashing issues, and talk through your options, whether that is a repair, a retrofit over existing shingles, or a full replacement.

Step 2: Once you approve the scope and price, we pull any required permits from the local building department and schedule the work. In King, that might mean coordinating with an HOA for color approval or planning around tight driveway access on older lots. Our crews are careful with landscaping and keep the job site organized. For retrofits over shingles, we verify the existing layers meet code before proceeding.

Step 3: After installation, we do a thorough cleanup, including magnet sweeping for nails and debris removal. We walk the property with you to review the finished work, confirm you are satisfied, and make sure you know how to reach us for any follow-up questions.

Pricing for metal roofing in King depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits the number of layers allowed. Repairs start at $450, and screw replacement or re-fastening starts at $750. Corrugated panel roofing is our most economical option at $5.50 per square foot, while copper and specialty metals start at $20 per square foot. We provide free estimates so you can get a clear, written price for your specific property. Call (336) 777-7251 to schedule yours.

My house is near the King Recreation Center and we get strong wind off the foothills. Will a metal roof hold up better than shingles?
Yes, metal roofs are much more resistant to wind uplift than asphalt shingles, especially when installed with the correct fasteners and edge metal. In King, the wind coming off the Sauratown Mountains can be gusty, so we recommend standing seam or a mechanically fastened panel with screws driven into solid decking. We also check that your eave and rake flashing are secured properly, since those are the first areas to fail in high wind.
A storm just knocked a limb onto my roof in King. Can you tarp it and do an emergency repair?
We handle storm and wind damage repairs in King and the surrounding areas. Call us at (336) 777-7251 and we will get a crew out to inspect the damage, tarp any active leaks if needed, and provide a written estimate for the repair. We document everything for insurance purposes, but coverage decisions are up to your insurer.
What does a typical metal roof replacement cost in King?
Most full replacements in King fall between $9 and $14 per square foot installed, depending on the material and roof complexity. That includes tear-off, underlayment, and new metal. A retrofit over existing shingles can be less, starting around $7 per square foot, but we first confirm your roof meets the local code limit for layers. We give you a detailed, itemized estimate before any work begins.
Do I need a permit to replace my roof in King, and who handles it?
Yes, the Town of King requires a permit for roof replacements and some repairs. Permit thresholds, fees, and inspection requirements can vary, so we always check with the local building department before starting. As part of our service, we pull the necessary permits and schedule inspections so you do not have to worry about the paperwork.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues for them. What should I do?
It is smart to think about drainage before installation. We design gutter and downspout systems to direct water away from foundations and property lines. If your roof runoff currently flows onto a neighbor's lot, we can adjust the gutter layout or add extensions. For HOA communities in King, we also help you get color and profile approvals before ordering materials.
Are you insured for roofing work in King?
Yes, Winston-Salem Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage.
What maintenance does a metal roof need in King to handle the humid summers and winter ice?
In King, the main things are keeping gutters clear of pine needles and leaves, checking fasteners after major wind events, and making sure flashing around chimneys and skylights stays sealed. We recommend a professional inspection every couple of years, especially on older roofs. We also offer screw replacement and re-fastening services starting at $750 to tighten up panels that have loosened over time.
Why choose us?

Trusted professionals in Winston-Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Winston-Salem

All your work handled by qualified professionals in Winston-Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

220+ Verified Client Reviews in Winston-Salem

⭐⭐⭐⭐⭐ 4.9/5 · 220 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Winston-Salem · Response within 24h · No commitment · ☎ (336) 777-7251

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Winston-Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm