Serving the Winston-Salem area  ·  (336) 777-7251  ·  Open Mon-Sun 7am-7pm
📞 (336) 777-7251 Free Quote

Metal Roofing in Bethania, NC (27106) · Local Professionals

Winston-Salem Metal Roofing · Fast response in Bethania and the Winston-Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+220Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bethania is one of the oldest Moravian settlements in the country, and its brick farmsteads and timber houses along Bethania-Rural Hall Road have been standing since the 1700s. If you own one of these older homes or a newer build on the edge of town, you already know that roofs here face hail, ice, and humid summers that find every weak flashing. We are Winston-Salem Metal Roofing, and we work on everything from copper details on historic structures to standing seam on modern homes in 27106.

Homeowners in Bethania call us because we understand the specific challenges of roofing here: steep pitches on Moravian-era buildings, tight lots near the old village center, and the need to match historic profiles when required. We are fully insured and based in Winston-Salem, so we know the local building department and the inspection requirements that come with older properties.

Metal Roofing in Bethania (27106)

Bethania sits in the rolling Piedmont foothills, and the ground here is red clay that holds water after storms. Many properties have mature tulip poplars and white oaks close to the house, which means shade, moss, and falling limbs are constant concerns. The older Moravian buildings often have steep roofs with clay tile or wood shingles, and retrofitting metal requires careful attention to decking and flashing, especially around chimneys and dormers. Newer homes in the area may have complex roof lines with multiple valleys, and we often see wind-lifted panels after summer thunderstorms. Access can be tight on the narrow streets near the historic district, so we plan staging carefully to avoid damaging landscaping or blocking neighbors.

Our team has worked on a range of properties in Bethania and the surrounding Winston-Salem area, from small repairs on barns to full replacements on historic homes. We know the local suppliers and the permit office, and we can help you choose a metal roof that fits the character of your home while meeting modern performance standards.

Our services in Bethania

How a Job Works in Bethania

Step 1: You call us at (336) 777-7251 or request a free estimate online. We schedule an on-site assessment at your convenience, and we inspect your roof, attic, and flashing details. We also discuss your goals, whether it is repair, replacement, or a new installation, and provide a written estimate with clear pricing.

Step 2: Once you approve the estimate, we handle the permitting with the local building department and order materials. For historic properties, we may need to coordinate with the historic district review board if your home is in a designated area. We schedule the work to minimize disruption, and our crew is trained to work safely on steep pitches and around obstacles like chimneys and skylights.

Step 3: After the job is complete, we clean the site thoroughly, removing all old materials and debris. We walk through the finished roof with you to ensure everything meets your expectations, and we provide a warranty on our workmanship. We leave your property clean and your roof ready for the next storm.

Pricing for metal roofing in Bethania depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits the number of layers you can have. Repairs start at $450, and leak repairs also start at $450. For a precise estimate tailored to your property, call us at (336) 777-7251. We offer free inspections and estimates, and we will walk you through all the options.

My house is near the historic Bethania district and has a steep roof with original wood shingles. Can you install metal without damaging the historic character?
Yes, we have experience working on historic homes in Bethania. We can match the profile and color of metal roofing to complement the historic look, and we are careful to preserve original details like flashing and trim. We also know the local historic review requirements and can help you navigate the approval process if needed.
A storm just knocked a limb onto my roof and I have an active leak. How quickly can you respond in Bethania?
We prioritize emergency calls in Bethania and the surrounding area. Call us at (336) 777-7251, and we will schedule a prompt inspection, often within 24 to 48 hours. We can tarp the area to prevent further damage and provide a repair estimate on the spot.
What is the typical cost to replace a metal roof on a 1,500-square-foot home in Bethania?
For a 1,500-square-foot home, a metal roof replacement typically ranges from $13,500 to $18,000, depending on the material and roof complexity. Standing seam may be on the higher end. We provide a detailed estimate after inspecting your roof, so you know exactly what to expect.
Do I need a permit for a metal roof replacement in Bethania, and how long does it take?
Yes, roofing permits are generally required for a full replacement in Bethania. The exact requirements and fees are set by the local building department, and we handle the application for you. Permit approval usually takes a few days to a couple of weeks, depending on the jurisdiction.
My neighbor's tree hangs over my property line and drops debris on my roof. Can I trim it, and does my HOA need to approve my new metal roof?
In North Carolina, you generally have the right to trim branches that overhang your property line, but it is best to check with local ordinances and perhaps talk to your neighbor first. For HOA approval, many associations require design review for roof changes, so we recommend submitting your proposed metal roof color and profile for approval before installation. We can provide product samples and documentation to help with the process.
Are you fully insured for roofing work in Bethania?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance.
What maintenance does a metal roof need in Bethania's climate, and when should I schedule it?
In Bethania's humid summers and winter ice, we recommend an annual inspection, ideally in the spring or fall, to check for loose fasteners, debris buildup, and signs of wear. Cleaning gutters and removing leaves from valleys helps prevent water damage. We offer maintenance plans and can perform inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Winston-Salem

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Winston-Salem

All your work handled by qualified professionals in Winston-Salem

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

220+ Verified Client Reviews in Winston-Salem

⭐⭐⭐⭐⭐ 4.9/5 · 220 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Winston-Salem · Response within 24h · No commitment · ☎ (336) 777-7251

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Winston-Salem ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm