Metal Roof Installation Clemmons, NC 27012 | Winston-Salem Metal Roofing

Metal Roofing in Clemmons, NC (27012) · Local Professionals

Winston-Salem Metal Roofing · Fast response in Clemmons and the Winston-Salem area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm

+220Verified Reviews

10Years in Business

4.9 ★Google Rating

24/7Available

Clemmons is the kind of place where mature oaks and pines hang over steep shingle roofs, and one good Piedmont thunderstorm can send a limb right through them. The 1980s and 2000s colonials off Lewisville-Clemmons Road and around Tanglewood have been through thirty-plus years of summer hail and winter ice, and a lot of those asphalt roofs are at the end of their run.

That is why homeowners in 27012 call us. We are based in Winston-Salem, we know the wooded lots and the steep pitches here, and we install standing seam and metal shingle roofs that shed leaves and limbs instead of collecting them. When a storm rolls through Clemmons, we are close enough to get out there and take a look.

Metal Roofing in Clemmons (27012)

Clemmons sits in the rolling Piedmont just southwest of Winston-Salem, and the housing stock tells the story. The older neighborhoods near the Clemmons Village and along Clemmons Road have brick ranches and two-story colonials from the 1970s through the 1990s, many with steep gable roofs and tall hardwoods crowding the roofline. Newer subdivisions out toward Bermuda Run and Lewisville have steeper pitches and more complex roof planes, which means more valleys, more flashing, and more places for wind-driven rain to find a way in. The red clay under all of it holds water after a storm, so gutter and drainage details matter as much as the panels themselves.

What we see most in Clemmons is limb damage and fastener failure. A white oak limb comes down on a shingle roof, punches a hole, and the homeowner does not notice until the ceiling stains. Or the original fasteners back out on an older metal roof and the panels start to lift at the edges in a straight-line wind. Our team handles standing seam, corrugated and ribbed panels, metal shingles, and stone-coated steel, plus the gutters that actually move water away from the foundation. We are fully insured with general liability and workers' compensation, and we have been working roofs across Forsyth County long enough to know what holds up here.

Our services in Clemmons

Metal Roof Installation in Clemmons · Complete metal roof installation for homes across Winston-Salem and Forsyth…
Standing Seam Metal Roofing in Clemmons · Concealed-fastener standing seam systems…
Metal Roof Replacement in Clemmons · Full tear-off and replacement of moss-streaked shingle…
Metal Roof Over Shingles (Retrofit) in Clemmons · A new metal roof installed directly over your existing asphalt shingles…
Metal Roof Repair in Clemmons · Repair of damaged, loose or storm-hit metal roofing…
Metal Roof Leak Repair in Clemmons · Priority leak response for metal roofs…
Screw Replacement & Re-Fastening in Clemmons · Winston-Salem's humid summers and cool nights expand and contract metal roofs…
Corrugated & Ribbed Panel Roofing in Clemmons · Exposed-fastener metal roofing (corrugated, R-panel and 5V)…
Metal Shingle Roofing in Clemmons · Metal shingles that deliver the look of architectural shingles…
Stone-Coated Steel Roofing in Clemmons · Stone-coated steel systems combining steel strength with a textured traditional…
Copper & Specialty Metal Roofing in Clemmons · Copper, zinc and aluminum roofing for accents, porches…
Metal Roof Coating & Painting in Clemmons · Restoration of faded, chalking or surface-rusted metal roofs: surface prep…
Flashing, Chimney & Skylight Repair in Clemmons · Repair and custom fabrication of flashing around chimneys, skylights, valleys…
Snow Guards & Ice Protection in Clemmons · Snow guards and rail systems for metal roofs…
Storm & Wind Damage Repair in Clemmons · Repair of hail, wind, falling-limb and ice-storm damage to metal roofing…
Metal Roof Inspection in Clemmons · Complete metal roof inspections for homeowners…
Gutters for Metal Roofs in Clemmons · Seamless gutter systems sized and mounted correctly for metal roofing…
Commercial & Agricultural Metal Roofing in Clemmons · Metal roofing for barns, workshops, churches…

How a Job Works in Clemmons

Step 1: you call us at (336) 777-7251 or send a request, and we set up a free on-site assessment. We walk the roof, check the flashing, valleys, and fasteners, and look at the attic side if you have had a leak. Then we give you a written estimate with the panel options and a realistic timeline, no pressure and no vague numbers.

Step 2: once you approve, we pull the permit through the local building department and schedule the crew. In Clemmons that often means coordinating with an HOA on panel profile and color, and planning around tight driveways and mature trees that limit where we can stage materials. We protect the landscaping, keep the dump trailer out of the neighbor's way, and tear off and install in a sequence that keeps the house dried in each day.

Step 3: cleanup and final walkthrough. We magnet-sweep the lawn and driveway for nails, haul off every scrap of old roofing, and walk the finished job with you. You get a clear explanation of what was done, the warranty paperwork, and our number if anything looks off later. We leave your property clean, and we do not consider the job done until you have looked it over yourself.

Pricing in Clemmons depends on the size and pitch of your roof, how many layers are coming off, access around the house, and how much flashing and trim the job needs. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, standing seam around $10, and copper or specialty metal around $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Gutters for metal roofs run from about $9 per linear foot, and snow guards and ice protection start at $1,200. Storm and wind damage inspections are free, and so are estimates. Call (336) 777-7251 and we will give you a real number for your house, not a range pulled out of the air.

My Clemmons colonial has tall oaks dropping limbs on a steep shingle roof. Is standing seam worth it here?

For a lot of homes off Lewisville-Clemmons Road and around Tanglewood, yes. Standing seam sheds leaves and small limbs instead of trapping them like asphalt shingles do, and the concealed fasteners hold up better to the straight-line winds we get in summer storms. It costs more up front, starting around $10 per square foot, but on a steep, tree-shaded roof it usually outlasts two or three shingle roofs.

A storm just took a limb through my roof in Clemmons. How fast can you get out?

Call (336) 777-7251 and we will schedule a free storm and wind damage inspection as quickly as we can, usually within a day or two depending on how many calls are coming in after the same storm. We can tarp an active leak to stop further damage and then give you a written repair estimate. We document the damage for your insurance claim, though coverage and your deductible are always between you and your insurer.

What does a metal roof cost for a typical Clemmons ranch or colonial?

Most Clemmons homes fall in the $8 to $10 per square foot range for installation, depending on whether you choose corrugated panels or standing seam. A retrofit over existing shingles starts around $7 per square foot and can save on tear-off costs, but local code limits how many existing layers you can cover. Repairs start at $450. The honest answer is that square footage, roof pitch, and flashing details drive the number, so call (336) 777-7251 for a free estimate.

Do I need a permit to replace my roof in Clemmons, and does the historic district or HOA get involved?

A full replacement or re-roof in Clemmons generally requires a roofing permit, and the threshold, fee, and inspection requirements are set by the local building department, so we confirm the rules before we start. If your home is in an HOA, design review can restrict panel profile and color, and we help you get the paperwork together. We always defer to the local building department on what is required for your specific address.

My neighbor's trees drop limbs and leaves on my Clemmons roof. What can I do about the property line?

North Carolina law generally lets you trim branches that overhang your property line, but you cannot go onto a neighbor's land or damage their tree without permission, so it is worth a conversation first. For the roof itself, we can install leaf guards and size the gutters so the debris from overhanging trees moves off instead of sitting in the valleys. If an HOA is involved, check the covenants before you trim or change anything visible from the street.

Are you insured for work on my Clemmons property?

Yes. That protects you if someone is injured on the job or if something on your property is damaged during the work. We are fully insured and we do not sub out the roofing work to uninsured crews.

What maintenance does a metal roof need in Clemmons with all these trees and humid summers?

The main thing is keeping debris off the roof and out of the gutters, especially in fall when the oaks and hickories drop. Leaves hold moisture against the panels and can clog gutters, which leads to water backing up under the eaves. Once a year, check the fasteners and the sealant around flashing and skylights, and after any big hail or wind storm, have us take a look. We offer free inspections and can quote a coating or painting refresh starting around $2.50 per square foot if the finish is fading.